1951-54 Chevy Passenger Car Firewall Mounted Power Brake Pedal Assembly With Master Cylinder And Booster

$429.95

A true bolt in power brake pedal kit.  Easy instructions and installation.   Whether you have a drum/drum, disc/drum, or a disc/disc application, we can cover your needs.

Requires a minimum of 18″ of vacuum for peak performance.

  • 8″ dual chamber booster with dual reservoir master cyl.
  • brake line ports on both side of master for easy plumbing

Description

 

Upgrade your brake system to Walton Fabrications firewall mounted power booster kit made specifically for your car.   This kit mounts where your inspection plate is on the firewall.

Simply remove your inspection cover from the firewall,  Do a pre-assembly  of the pedal kit and install in the hole where your inspection cover was located.   Install the dash bracket at the dash behind the gauges, add the brake arm and attaching hardware and tighten.

Add the booster / master combo and recommended metering valve, install the vacuum hose and you are all set !  Most people say it takes about an hour to install.

This kit comes with a dual reservoir master cylinder and a dual chamber 8″ power booster.     Note:  drum/drum application comes with a 7″ dual booster)

This is a true bolt in !

Additional information

Weight 30 lbs
Dimensions 12 × 12 × 20 in
Brake Configuration

Disc Front / Disc Rear, Disc Front / Drum Rear, Drum Front / Drum Rear

Year Make Model
Year Make Model
1951 - 1952 Chevrolet Passenger Car
1952 - 1954 Chevrolet Passenger Car