Sale!

ididit 1958 Impala Tilt Column Shift Retrofit Steering Column (Copy)

$797.00$1,052.00

This retrofit column is designed to fit your 1958 Impala and does NOT require modification to your original vehicle to install. Simply remove your old column, saving your original under dash mount and floor mount.

Available in Paintable Steel, Black Powder Coat and Chrome.

Clear
Product price
Additional options total:
Order total:

Description

This retrofit column is designed to fit your 1958 Impala and does NOT require modification to your original vehicle to install. Simply remove your old column, saving your original under dash mount and floor mount.

Using an ididit installation kit, install your new steering column in place of the old.

These columns come complete with a neutral safety switch (shift indicator not included). The 1958 columns will match the dash perfectly using the original bezel.

The shift pattern on the column allows you to use either a 3 or 4-speed automatic transmission (except early Powerglides, as they have a reverse pattern transmission).

A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column.

Add an aftermarket wheel (using an adaptor) or original wheel but keep in mind that an aftermarket wheel may push the wheel closer to the driver and the original wheel will increase the overall length of the column towards the driver.

Available in Paintable Steel, Black Powder Coat and Chrome.

Specifications

Fits Vehicle

1958 Chevrolet Impala

Lower Shaft

3/4″ 36

Straight or Tilt

8-Position Tilt

Neutral Safety Switch

No

4-Way Flashers

Yes

Self-Canceling Turn Signals

Yes

Telescoping Head

No

Wire Plug

GM 3 7/8″

Horn

Yes

Gear Shift Indicator Included

No

Floor Mount Included

No

Knobs & Levers Included

Yes

Under Dash Mount Included

No

Collapsible

No

Lower Tube Diameter (in)

2 in

Upper Tube Diameter (in)

2 in

Upper Shaft

69 to ’94 GM Passenger Car

Shifter Location

Column

Transmission

Auto

Optional Installation Kits

Deluxe Kit
This kit includes all the necessary parts you will need to install the column to the gearbox. All you need to know is the diameter of the gearbox input shaft and the number of splines.

Econo Kit
We had the builder on a budget in mind when we designed this kit. The original joint and intermediate shaft are used. The shaft will need to be cut and modified to match the 3/4″ DD u-joint. Due to age, the original rag joint may be worn so please double check to make sure it is in good condition. ididit, inc. always recommends replacing the rag joint.

Original Harness
For vehicles with an original factory harness, a 4-way flasher kit is included in your installation kit.  This 4-way flasher kit will not only add safety to your vehicle, but will also convert your original wiring harness to the 3 7/8″ plug found on your ididit column.

Aftermarket Harness
Many aftermarket wiring companies offer replacement harnesses that incorporate a 4-way flasher unit as well as the flat 3 7/8″ plug.  If you are using one of these harnesses, a 4-way flasher kit is not necessary.

Kit Type DELUXE KIT – ORIGINAL HARNESS DELUXE KIT – AFTERMARKET HARNESS
Contents U-Joint/Shaft/Rag Joint/Flasher Kit U-Joint/Shaft/Rag Joint
Gearbox Input Shaft Manual 3/4″-30 Manual 3/4″-36 Power 13/16″-36 Manual 3/4″-30 Manual 3/4″-36 Power 13/16″-36
1958 3007001007 3007002007 N/A 3007001000 3007002000 N/A

 

Kit Type ECONO KIT – ORIGINAL HARNESS ECONO KIT – AFTERMARKET HARNESS
Contents U-Joint/Flasher Kit U-Joint Only
1958 3002001007 3000013434

Additional information

Weight 18 lbs
Dimensions 47 × 12 × 6 in
Steering Column Finish

Black Powder Coat Finish, Chrome Finish, Paintable Steel Finish